130mm Alu Body Submersible Fountain Lights Led Control For One Nozzle In Water Fountain

130mm Alu Body Submersible Fountain Lights Led Control For One Nozzle In Water Fountain

Descrisption:

1. The shell of lamps is 304 stainless steel surface and
aluminum body casting;
2. 5-8mm thickness high-strength tempered glass, high
temperature resistant;
3. There is high temperature resistant to import silicon rubber sealing ring;
4. The nickel plated copper waterproof cable lock;
5. 1.6mm high quality high thermal conductivity aluminum PCB
6. High thermal conductivity W.m 1.59/K thermal conductive
silicone;
7. Lens: optical lens, any angles can be made
8. Source: Big Power LED, 1W*6PCS, 2W*6PCS, 3W*6PCS, 1W*9PCS, 2W*9PCS, 3W*9PCS
9. Color: red, green, blue, amber, white, warm white, RGB;
10. Control mode: synchronous control (only support power
frequency voltage), normally on the four lines of three circuits
including Yang external control PWM, four line three circuit,
PLC relay control, DMX512 serial external control
11. Driver: built-in constant-current drive;
12. Input voltage: AC12V, AC24V, DC12V, DC24V
13. Consumed power: Pw ≦ 10W;
14. The input current, Iin ≦ 0.85 A;
15. Protection grade reference: IP68;
16. Using the environment temperature: - 20 ℃ - 45 ℃
17. Appearance size: Diameter 130mm * Height 68mm ;
18. Suitable for diameter less than DN38mm conduit;
19. Application: fountain, artificial lake, lake of natural ecology,
swimming pool, aquarium etc. All using underwater
lighting or decoration places.

Application Places:

For musical fountain, it will have very great effection, one light for one nozzle

Technical Specification:

underwater led fountain lights

underwater pond lights

130mm Alu Body Submersible Fountain Lights Led Control For One Nozzle In Water Fountain Images